Студопедия

КАТЕГОРИИ:

АстрономияБиологияГеографияДругие языкиДругоеИнформатикаИсторияКультураЛитератураЛогикаМатематикаМедицинаМеханикаОбразованиеОхрана трудаПедагогикаПолитикаПравоПсихологияРиторикаСоциологияСпортСтроительствоТехнологияФизикаФилософияФинансыХимияЧерчениеЭкологияЭкономикаЭлектроника


Polystyrene.




Polystyrene is a thermoplastic produced by the polymerization of styrene. The electrical insulat­ing properties of polystyrene are outstandingly good and it is relatively unaffected by water. Typical applications include lightfixtures, toys, bottles,lenses, capacitordielectrics, medicalsyringes, andlight-duty industrial components. Extruded sheets of polystyrene are widely used for packaging,envelope windows, and photographic film. Its resistance toimpact can beimproved by the addition of rubbermodifiers. Polystyrene can bereadily foamed; the resulting foamed polystyrene is usedexten­sively for packaging.

4. Polythene (polyethene, polyethylene)

Polythene (polyethene, polyethylene) is a plastic made from ethane. It is one of the most widely used important thermoplastic polymers. It was first developed by the polymerization of ethane at a pres­sure of 2,000 bar at 200°C. This produced low-density poly­thene (LDPE). A relatively high-density form (HDPE) was synthesized in the 1950s using a complexcatalyst. Poly­thene is a whitewaxy solid with very low density,rea­sonable strength and toughness, but low stiffness. It is easily moulded and has a wide range of uses in contain­ers, packaging,pipes, coatings, and insulation.

Vocabulary:


adhesion— прилипание

adhesive — клей

bond — связи, узы

insulation — изоляция

casting — литье

void — пустота

solid — твердое тело, твердый

acid — кислота

alkali — щелочь

to obtain — доставать, получать

granule— гранула

solution — раствор

lattices — латексы

paste— паста

yield— выход

durable — прочный

rubber— резина, каучук

garment — предметы одежды

lens —линза

capacitor — эл. конденсатор

syringe— шприц

light-duty — неответственный

envelope — зд. обрамление

impact — удар

improved — улучшенный

modifiers — модификаторы

addition — добавление

readily — легко, с готовностью

foam — пена

catalyst — катализатор

wax — воск

reasonable — приемлемый, неплохой

coating — слой, покрытие


General understanding:

1. What are the types of plastics?

2. What are the features of the epoxy resin?

3. What is epoxy resin used for?

4. What is PVC usually used for?

5. What are the typical applications of polystyrene?

6. When was polyethylen synthesized?

7. Under what conditions is polyethylen synthesized?

8. What sorts of polyethylen can be synthesized?

Exercise 5.3. Translate into Russian:

1. Polythene is a plastic made from ethane.

2. Epoxy resins have outstanding adhesion, toughness and resistance to attack from chemicals.

3. PVC is a colourless solid with outstanding resist­ance to water, alcohols, and concentrated acids and al­kalis.

4. Polystyrene is a thermoplastic produced by the po­lymerization of styrene.

5. Polythene is a white waxy solid with very low den­sity, reasonable strength and toughness but low stiffness.

Exercise 5.4. Translate into English:

1. Эпоксидная смола затвердевает когда смешива­ется с отвердителем и пластификатором.

2. Эпоксидные смолы используются в качестве клея, а с добавками — в строительстве лодок и спор­тивного снаряжения.

3. ПВХ — бесцветное твердое вещество с выдаю­щейся устойчивостью к воздействию воды, спиртов, концентрированных кислот и щелочей.

4. ПВХ широко используется при производстве изоляции для проводов.

5. Выдувка непластифицированного ПВХ исполь­зуется при производстве прозрачных бутылок для на­питков.

6. Полистирол легко вспенивается и используется для упаковки.

7. Полиэтилен — воскообразное вещество белого цвета с очень низкой плотностью и малой жесткостью.

Text С: «COMPOSITE MATERIALS»

The combinations of two or more different materials are called composite materials. They usually have unique mechanical and physical properties because they combine the best properties of different materials. For example, afibre-glass reinforced plastic combines the high strength of thin glassfibres with the ductility and chemi­cal resistance of plastic. Nowadays composites are being used for structures such as bridges, boat-building etc.

Composite materials usually consist of synthetic fi­bres within a matrix, a material that surrounds and is tightly bound to the fibres. The most widely used type of composite material ispolymer matrix composites(PMCs). PMCs consist of fibres made of a ceramic mate­rial such as carbon or glass embedded in a plastic matrix. Usually the fibres make up about 60 per cent by volume. Composites with metal matrices or ceramic matrices are calledmetal matrix composites (MMCs) andceramic matrix composites (CMCs), respectively.

Continuous-fibre composites are generally required for structural applications. Thespecific strength(strength-to-density ratio) andspecific stiffness (elastic modulus-to-density ratio) of continuous carbon fibre PMCs, for example, can be better than metal alloys have. Composites can also have other attractive properties, such as high thermal or electrical conductivity and a low coefficient of thermalexpansion.

Although composite materials have certain advan­tages over conventional materials, composites also have some disadvantages. For example, PMCs and other com­posite materials tend to be highlyanisotropic— that is, their strength, stiffness, and other engineering proper­ties are different depending on the orientation of the com­posite material. For example, if a PMC is fabricated so that all the fibres are lined up parallel to one another, then the PMC will be very stiff in the direction parallel to the fibres, but not stiff in the perpendicular direction. The designer who uses composite materials in structures subjected to multidirectional forces, must take these anisotropic properties into account. Also, forming strong connections between separate composite material com­ponents is difficult.

The advanced composites have high manufacturing costs. Fabricating composite materials is a complex proc­ess. However, new manufacturing techniques are devel­oped. It will become possible to produce composite mate­rials at higher volumes and at a lower cost than is now possible, accelerating the wider exploitation of these materials.

Vocabulary:


fibreglass— стекловолокно

fibre — волокно, нить

reinforced — упрочненный

expansion — расширение

matrix — матрица

ceramic — керамический

specific strength — удельная прочность

specific stiffness — удельная жесткость

anisotropic — анизотропный


General understanding:

1. What is called «composite materials»?

2. What are the best properties of fibre-glass?

3. What do composite material usually consist of?

4. What is used as matrix in composites?

5. What is used as filler or fibers in composites?

6. How are the composite materials with ceramic and metal matrices called?

7. What are the advantages of composites?

8. What are the disadvantages of composites?

9. Why anisotropic properties of composites should be taken into account?

Exercise 5.5. Find equivalents in the text:


1. композитные материалы

2. уникальные механические качества

3. полимерные матричные композиты

4. составлять 60% объема

5. углепластик

6. привлекательные качества

7. структура, подвергающаяся воздействию разнонаправленных сил


Exercise 5.6. Translate into Russian:

1. PMC is fabricated so that all the fibres are lined up parallel to one another.

2. Forming strong connections between separate com­posite material components is difficult.

3. Fabricating composite materials is a complex process.

4. Composite materials have certain advantages over conventional materials

5. Nowadays, composites are being used for structures such as bridges, boat-building etc.

6. Continuous-fibre composites are generally required for structural applications.


Поделиться:

Дата добавления: 2015-02-10; просмотров: 77; Мы поможем в написании вашей работы!; Нарушение авторских прав





lektsii.com - Лекции.Ком - 2014-2024 год. (0.005 сек.) Все материалы представленные на сайте исключительно с целью ознакомления читателями и не преследуют коммерческих целей или нарушение авторских прав
Главная страница Случайная страница Контакты