Support IPv6 Spec 1.12R

Firmware: v2.00 Build: 07

Hardware: B1

Date: 12, Aug 2010

KERNEL: 2.6.28

SDK: 1.0, Build: 0033, Date: Thu, 12, Aug, 2010

CheckSum:0x3373A109

1.Fix bug:QRS v5.04b06 dns ip can’t be shown in wan status.

2.Fix bug:DCC 4.0 auto-channel check mark be removed after set wireless security via DCC, but wireless channel still use auto-channel function.

Firmware: v2.00 Build: 06

Hardware: B1

Date: 12, Aug 2010

KERNEL: 2.6.28

SDK: 1.0, Build: 0033, Date: Thu, 12, Aug, 2010

CheckSum: 0x33981778

1.Fix QRS v5.04b06 and DCC v4.0 failed when set wan setting.

Firmware: v2.00 Build: 05

Hardware: B1

Date: 04, Aug 2010

KERNEL: 2.6.28

SDK: 1.0, Build: 0031, Date: Wed, 04, Aug, 2010

CheckSum:0x3373A109

Fix QoS will let wan on demand not work.

2.Fix guest zone ssid has special character, "STATUS/DEVICE INFO" display error.

Fix ddns failed when DDNS Server Address is upper case string.

4.Fix Port Forwarding TCP and UDP port not single one, the configuration couldn't be saved.

Fixed Language-Version info in chklst.txt issue.

6.Fix bug: Default port number issue for IPv6 firewall(TSD),The default port range for IPv6 firewall should start from "1"

Test DCC 4.0

Firmware: v2.00 Build: 04

Hardware: B1

Date: 29, Jul 2010

KERNEL: 2.6.28

SDK: 1.0, Build: 0030, Date: Thu, 29, Jul, 2010

CheckSum:0x3375B924

1.Fixed bug: WISH can’t work.

2.Fixed bug: USB Setting and WISH can’t show help file.

3.Fix sometimes display wrong name for LAN Computers at "STATUS/DEVICE INFO"

Fixed BT issue. Start BT and run 7 hours , DUT WAN will disconnected then connected again.

Add European 3G ISP list.

Follow Specification of D-Link AP and Router Reset and Recovery Mode v1.0

Restore to factory default after reset button is pressed 5 seconds.

7.add USB 3G support DWM-152/156A3

8.Fixed WLAN PC's(static IP) hostname can not displayed for LAN Computers at

"STATUS/DEVICE INFO".

Fixed version.txt needs login and chklst.txt does not need to login.

10.Fixed GuestZone SSID not display on Device Info when SSID include special character(\).

11.Fix wrong strings "Low/option>" for "Transmit Power" at "Advanced Wireless Settings".

12.Fix bug: Wireless setting can not saved after save the configuration file.

13.Fix bug: Wireless wizard security 64 describes display error.

14.Fix bug: WCN configuration saves failed.

15.Fix bug: USB settings cannot save when 3G change to network/WCN.

16.Fix bug: Default port number issue for IPv6 firewall(TSD),The default port range for IPv6 firewall should start from "1"

17.Fix bug: IPv6 firewall all not work when schedule applied at any of rule.

18.Fix bug: DDNS not check public IP(DLinkDDNS.com/No-Ip.com)

19.Fix bug: QRS can save advanced DNS.

Add Language Pack info in chklst.txt.

Firmware: v2.00 Build: 03

Hardware: B1

Date: 09, Jul 2010

Firmware Version: ver2.00b03

Firmware Date:Fri, 09,Jul, 2010

KERNEL: 2.6.28

SDK: 1.0, Build: 0029, Date: Fri, 9, Jul, 2010

CheckSum: 0x33789CE9