History of Oil Exraction

Petroleum, in some form or other, is not a substance new in the world’s history. More than four thousand years ago, according to Herodotus and confirmed by Diodorus Siculus, asphalt was employed in the construction of the walls and towers of Babylon; there were oil pits near Ardericca (near Babylon), and a pitch spring on Zacynthus. Great quantities of it were found on the banks of the river Issus, one of the tributaries of the Euphrates. Ancient Persian tablets indicate the medicinal and lighting uses of petroleum in the upper levels of their society.

The first oil wells were drilled in China in the 4th century or earlier. They had depths of up to 243 meters (about 800 feet) and were drilled using bits attached to bamboo poles. The oil was burned to evaporate brine and produce salt. By the 10th century, extensive bamboo pipelines connected oil wells with salt springs. The ancient records of China and Japan are said to contain many allusions to the use of natural gas for lighting and heating. Petroleum was known as burning water in Japan in the 7th century.

In the 8th century, the streets of the newly constructed Baghdad were paved with tar, derived from easily accessible petroleum from natural fields in the region. In the 9th century, oil fields were exploited in the area around modern Baku, Azerbaijan, to produce naphtha. These fields were described by the geographer Masudi in the 10th century, and by Marco Polo in the 13th century, who described the output of those wells as hundreds of shiploads. Petroleum was first distilled by Muslim chemists in the 9th century, producing chemicals such as kerosene.

The earliest mention of American petroleum occurs in Sir Walter Raleigh’s account of the Trinidad Pitch Lake in 1595; whilst thirty-seven years later, the account of a visit of a Franciscan, Joseph de la Roche d’Allion, to the oil springs of New York was published in Sagard's Histoire du Canada. A Russian traveller, Peter Kalm, in his work on America published in 1748 showed on a map the oil springs of Pennsylvania.

The modertn history of petroleum began in 1846 with the discovery of the process of refining kerosene from coal by Atlantic Canada’s Abraham Pineo Gesner. The first modern oil well was drilled in 1745 in Pechelbronn, Alsace (France) under the direction of Louis de La Sablonniere, by special appointement of King Louis XV. The Pechelbronn oil field was alive until 1970, and was the birth place of companies like Schlumberger. The first modern refinery was built there in 1857.

Poland’s Ignacy Lukasiewicz discovered a means of refining kerosene from the more readily available «rock oil» («petr-oleum») in 1852 and the first rock oil mine was built in Bobrka, near Krosno in southern Poland in the following year. These discoveries rapidly spread around the world, and Meerzoeff built the first Russian refinery in the mature oil fields at Baku in 1861. At that time Baku produced about 90% of the world’s oil.

By 1910, significant oil fields had been discovered in Canada (specifically, in the province of Ontario), the Dutch East Indies (1885, in Sumatra), Iran (1908, in Masjed Soleiman), Peru, Venezuela, and Mexico, and were being developed at an industrial level.

Even until the mid-1950s, coal was still the world's foremost fuel, but oil quickly took over. Following the 1973 energy crisis and the 1979 energy crisis, there was significant media coverage of oil supply levels. This brought to light the concern that oil is a limited resource that will eventually run out, at least as an economically viable energy source. At the time, the most common and popular predictions were always quite dire, and when they did not come true, many dismissed all such discussion. The future of petroleum as a fuel remains somewhat controversial. USA Today news (2004) reports that there are 40 years of petroleum left in the ground. Some would argue that because the total amount of petroleum is finite, the dire predictions of the 1970s have merely been postponed. Others argue that technology will continue to allow for the production of cheap hydrocarbons and that the earth has vast sources of unconventional petroleum reserves in the form of tar sands, bitumen fields and oil shales that will allow for petroleum use to continue in the future, with both the Canadian tar sands and United States shale oil deposits representing potential reserves matching existing liquid petroleum deposits worldwide.

Today, about 90% of vehicular fuel needs are met by oil. Petroleum also makes up 40% of total energy consumption in the United States, but is responsible for only 2% of electricity generation. Petroleum's worth as a portable, dense energy source powering the vast majority of vehicles and as the base of many industrial chemicals makes it one of the world's most important commodities. Access to it was a major factor in several military conflicts including World War II and the Persian Gulf Wars of the late twentieth and early twenty-first centuries. The top three oil producing countries are Saudi Arabia, Russia, and the United States. About 80% of the world’s readily accessible reserves are located in the Middle East, with 62.5% coming from the Arab 5: Saudi Arabia (12.5%), UAE, Iraq, Qatar and Kuwait. However, with today’s oil prices, Venezuela has larger reserves than Saudi Arabia due to crude reserves derived from bitumen.

Oil occurs in certain geologic formations at varying depths in the earth’s crust, and in many cases elaborate, expensive equipment is required to get it from there. The oil is usually found trapped in a layer of porous sandstone, which lies just beneath a dome-shaped or folded layer of some non-porous rock such as limestone. In other formations the oil is trapped at a fault, or break in the layers of the crust.

In the dome and folded formations natural gas is usually present just below the non-porous layer and immediately above the oil. Below the oil layer the sandstone is usually saturated with salt water. The oil is released from this formation by drilling a well and puncturing the limestone layer on either side of the limestone dome or fold. If the peak of the formation is tapped, only the gas is obtained. If the penetration is made too far from the center, only salt water is obtained. Since the formation may be several miles below the surface this is clearly a difficult business.

The oil in such formation is usually under such great pressure that it flows naturally, and sometimes with great force, from the well. However, in some cases this pressure later diminishes so that the oil must be pumped from the well. Natural gas or water is sometimes pumped into the well to replace the oil that is withdrawn. Oil wells may be either on land or under water. In North America many wells are «offshore» in the shallow parts of the oceans, especially in the Gulf of Mexico. The «crude» or unrefined oil is typically collected from individual wells by small pipelines.