Sector Layout

The Sector Layout description file, FS_FlashDev.h, specifies the memory map of the device. Every device has its own description file located in the folder \ARM\RL\FlashFS\Flash\device_family.

To generate a new description file, copy the flash sector layout information from the Flash device datasheet. Specify a sector size in bytes and a sector base address relative to a Flash device start address. The macro DFB converts this information into RL-FlashFS compatible sector descriptions.

• Flash sectors must not be aligned continuously. Gaps are allowed in the device memory space.
• Flash sectors can be reserved for application code. Do not include such sectors in the FLASH_DEVICE description table.

The following example shows a Flash sector layout description for the Am29x800BT Flash device:

#define FLASH_DEVICE \

DFB(0x10000, 0x000000), /* Sector Size 64kB */ \

DFB(0x10000, 0x010000), /* Sector Size 64kB */ \

DFB(0x10000, 0x020000), /* Sector Size 64kB */ \

DFB(0x10000, 0x030000), /* Sector Size 64kB */ \

DFB(0x10000, 0x040000), /* Sector Size 64kB */ \

DFB(0x10000, 0x050000), /* Sector Size 64kB */ \

DFB(0x10000, 0x060000), /* Sector Size 64kB */ \

DFB(0x10000, 0x070000), /* Sector Size 64kB */ \

DFB(0x10000, 0x080000), /* Sector Size 64kB */ \

DFB(0x10000, 0x090000), /* Sector Size 64kB */ \

DFB(0x10000, 0x0A0000), /* Sector Size 64kB */ \

DFB(0x10000, 0x0B0000), /* Sector Size 64kB */ \

DFB(0x10000, 0x0C0000), /* Sector Size 64kB */ \

DFB(0x10000, 0x0D0000), /* Sector Size 64kB */ \

DFB(0x04000, 0x0E0000), /* Sector Size 16kB */ \

DFB(0x08000, 0x0E4000), /* Sector Size 32kB */ \

DFB(0x02000, 0x0EC000), /* Sector Size 8kB */ \

DFB(0x02000, 0x0EE000), /* Sector Size 8kB */ \

DFB(0x02000, 0x0F0000), /* Sector Size 8kB */ \

DFB(0x02000, 0x0E2000), /* Sector Size 8kB */ \

DFB(0x08000, 0x0F4000), /* Sector Size 32kB */ \

DFB(0x04000, 0x0FC000), /* Sector Size 16kB */ \

#define FL_NSECT 22

Note

• When the Flash device is also used for other purposes than storing files, do not provide the function EraseChip in the Flash driver.
• An alternative to writing a new sector layout is to convert the device specification provided for ULINK adapters. Refer to Converting FlashDev.c for detailed instructions.